Home PageAbout UsSearchContact UsSite Map

PERFORMANCE PRODUCTS

Raptor 80 Racing products add Safety, Stability and Traction to your quad.
They can also increase horsepower and enhance overall performance!

For More Performance Parts - Visit Mid-Cal MotorSports


Adaptors - Widening
Wheel Spacer
Part# R-1004

Fits any 10mm stud.

  • Please Call for Prices




  • Spacers

    2" Billet Aluminum spacers for the rear of the Raptor 80 or Raptor 50.
    Includes studs and nuts. Bolts directly onto your stock hub.



  • Please Call for Prices
  • Front Wheel Adapter / Spacer
    Part# R-1002

    Also allows the use of offset aluminum wheels and racing type tires. Can widen the front of the quad more than 4 inches.

  • Please Call for Prices
  • Double click to select image.

    Douglas Wheel with Reinforcing Ring

    8" x 8" for Rear & 10" x 5" for Front - Reinforcement Ring Wheels are the most common size you will find. Tire selection for this size is plentiful. It is a common choice for motocross or stadium racing with a low-profile MX-style tire. This type of competitor will often benefit from a Beadlock on the outside and an OMF Reinforcement Ring on the inside of the wheel. This size is also used in flat track and off-road competition, but generally a larger size is preferred, depending on the event. Available in a wide variety of offsets, width and bolt patterns.MF's

    8" x 8" Rear

    10" x 5" Front

  • Please Call for Prices

    Reinforcement Rings are designed with holes. While they do make the ring slightly lighter, the main function of these holes is to keep debris such as mud, water, sand and rocks from getting caught inside the wheel, which can add weight and/or cause a severe out-of-balance condition.



  • Aluminum Wheels

    Douglas 125 Aluminum offset Wheels for front.
    Part# R-2001 use with Adapter / Spacer - See above

    10" x 5"
    8" x 6"

  • Please Call for Prices
  • Double click to select image.

    Douglas 125 Aluminum Wheel for rear.
    Part# R-2002 - Adapter / Spacer not needed

  • Please Call for Prices





  • ITP Wheel

  • Please Call for Prices

    10" x 5" (Does not require adaptors)

  • No pix



    Tires

    GBC Shredder R/A Rear - 18x9.5x8. -

  • Please Call for Prices

    Part# R-3001

  • GBC Shredder R/A Front 16 x 650 x 8 -

  • Please Call for Prices


    Part# R-3004

  • Titan Turf Tamer Rear - 18x9.5x8 -

  • Please Call for Prices


    Part# R-3003


  • Maxis Raxr MX - 18x10x8 -

  • Please Call for Prices

    Part# R-3012

  • Skat-Trak 18x8.5x8 - 6 Paddle -

  • Please Call for Prices


    Part# R-3005

  • All Purpose 19x7x8 traction

  • Please Call for Prices

    Part# R-3010

    NEW!

  • Front

    Hole shot 18x6.5x8 mx
    Part# R-3006

    Hole shot 19x6x10 mx
    Part# R-3007

    Hole shot 20x6x10 mx
    Part# R-3008

    Rear

    Hole shot 18x10x8 MXR-4
    Part# R-3009

  • Please Call for Prices
  • NEW!

    ITP Sandstar - Front - 19 x 6 x 10"
    NOW IN STOCK!

    ITP Sandstar - REAR - 18 x 9.5 x 8"
    NOW IN STOCK!

  • Please Call for Prices

  • Miscellaneous



    NEW Billet anodized gas caps for Raptor 80/50 and most mini quads.

    (Eton, Kasea, Polaris, Dinli, Alpha Sport and more).


  • Please Call for Prices


  • CUSTOM FLAMING SEAT COVERS now available for Raptor 80 and 50's - Many colors available. Other designs also available.

  • Please Call for Prices



  • LIGHTING KIT -SUPER BRIGHT BILLET LED LIGHTS GREAT FOR INTERIOR LIGHTING, UNDERBODY ACCENT LIGHTING AND EXTERIOR LIGHTING FOR LONG RANGE VISIBILITY. (OVER A MILE)

    PLUS YOU CAN DO IT IN EIGHT COLORS !!!

    (Complete Kits Available)

    Panel Mounts available in Yellow - Red - Green - Amber

  • Please Call for Prices


  • Billet Mount

    NEW!

    Click Here for
    LIGHT PIX !

    Custom High Performance Pipe -

    Available only from Raptor 80 Racing. Increases overall performance up to 20% -

    Raptor 80 & Raptor 50

  • Please Call for Prices
  • Big Gun Racing Pipe (Head Pipe and Silencer) with
    Spark Arrester.
    Part# R-4001

  • Please Call for Prices
  • Racing Pipes from $190.00.
    Many additional brands - FMF, White Bros., Pro-Circuit, DMC/Alien and others.



    A-T Steeler single shock with single rate spring for light duty applications.
    (Specify weight of rider and style of riding) Shocks are custom built. Allow 3-4 weeks for delivery.

  • Please Call for Prices

    (set of 3)


  • Kill Cord (Required for Racing).
    Part# R-4003

  • Please Call for Prices



  • DG alloy front bumper

  • Please Call for Prices





  • The only Nerf Bar available for the Raptor 50 and available only thru Raptor 80 Racing.

    All alloy construction with race pegs and heel guards.

  • Please Call for Prices





  • The only alloy Nerf Bar available for the Raptor 80 with heel guards and race pegs. Wide enough to accommodate a race-ready quad @ 40+ inches.

  • Please Call for Prices





  • Mini Iron Cross Bumper

    The kids deserve to look cool too! With a high demand from mom's and dad's to have a mini version, Blingstar came through once again. Blingstar's Mini Iron Cross has style and safety all in one. Fits Raptor 80 and 50.

  • Please Call for Prices
  • DG Alloy Nerf Bars with Webbing.

    Standard colors are blue or black. Custom colors available for additional $40.00.

  • Please Call for Prices

  • Please Call for Prices
    Engine Parts
    DC HI-PERFORMANCE CDI BOX NEW!

    Most advanced brain box on the market for minis. Switches your ignition system from AC to DC for a much stronger and cleaner spark. Integrated computer chip advances timing 25 degrees on take off for best bottom end then retards back to zero as it reaches higher RPMs.


    Big Bore Kit (93cc)

    Complete with rings, pin, clips and gaskets

    Stock cylinder must be bored out.

    Part # R-6000


    Race Cam

    Increase performance. Custom welded and ground.

    ($80.00 core charge in addition to cost of cam)


    20mm Race Carb

    Chrome-plated round slide carburetor, enables you to achieve high performance thru all RPM ranges.

    Complete with stainless steel high-flow manifold, K&N air cleaner, outerwear and cable. (Specify jetting when ordering)


    Jet Kit for Stock Carb

    Increase performace.


    no picture


    Cometic Gasket Set (top and bottom) For Stock Carb



    no picture

    Air Filters

    K & N Style Clamp-on Air Filter
    Part# R-5001

    +

    Outerwear - Water Resistant
    Part# R-5002

    K & N Recharger Kit (Oil and Cleaner)
    Part# R-5003

    Custom Dual-Stage Foam Filter
    (color may vary)

    Part# R-5004

    NEW! Frame Mounted HID Lights!

    Complement your stock lights with these frame mounted HID lights.  Simply clamp the lights to the frame and connect the wire harness to the key switch power.  Trail Tech frame mounted HID lights put out  80 watts of halogen equivalent light while only drawing 13 watts per light (26 watts total).

    Raptor 80 Racing also sells heat proof light covers to protect your valuable HID lights.

    7/8" Frame Mounted HID Kit                      PART #: HIDV-875

     

        Price

    Kit comes complete with two 7/8" HID lights, mounting hardware, wiring harness and photographic installation instructions for easy installation.  Fits Suzuki/KFX 400, Honda 400 EX and YFZ450 and any ATV with a 7/8" frame tube.

  • Please Call for Prices
  • 1" Frame Mounted HID Kit                    PART #: HIDV-100

     

     

    Kit comes complete with two 1" HID lights, mounting hardware, wiring harness and photographic installation instructions for easy installation.  Fits Polaris Predator and any ATV with a 1" frame tube.

  • Please Call for Prices
  •  

    1 1/8" Frame Mounted HID Kit                    PART #: HIDH-125

     

     

    Kit comes complete with two 1 1/8" HID lights, mounting hardware, wiring harness and photographic installation instructions for easy installation.  Fits Yamaha Raptor and any ATV with a 1 1/8 inch frame tube.

  • Please Call for Prices
  •  

    Yamaha Raptor 80 Frame Mounted HID Kit                    PART #: HIDH-R80

     

     

    Kit comes complete with a single HID light, mounting hardware, wiring harness and photographic installation instructions for easy installation.  Fits Yamaha Raptor 80. The single frame mount is designed to attach to the OEM front bumper.

    Includes heat-proof light cover.

  • Please Call for Prices
  •  

    Prices subject to change. Call for Availability. Prices do not include shipping or California state tax.

  •  

    Home Page | About Us | Search | Contact Us | Site Map